Posted on

Dr. Shrink's Installation Accessories

*To see the entire blog, click here.
Dr. Shrink has all of the installation accessories you need to make your shrink wrap job easier, faster, and cleaner. Our most popular boat/marine accessories are listed below.
Venting is one of the most important parts of wrapping a boat. A properly ventilated cover will allow cross-flow ventilation throughout the cover minimizing chances of excess moisture and mildew. Our Weather-Tight Self-Adhesive Vents are easy to install using the one-piece pull tab that exposes over 15 square inches of adhesive. They are water resistant and can be installed either vertically or horizontally. Don’t forget to check out our Weather-Tight Filter Vent – it uses a filter pad inside the vent top to keep dust, bugs, dirt and other debris out of shrink wrapped products.
Our Heat Shrink Tape is a 9-mil polyethylene tape that is designed to install doors and seal pleats, seams and holes. It also has a powerful backing that adheres nicely to shrink wrap. It’s available in blue, white or clear and in a variety of sizes.
The End Caps and Bottom Caps are designed to fit on the top and bottom of 2×4 boards commonly used as support poles under shrink wrap covers. They have slits every 90° for the woven cord strapping to slide into and when the cover is shrunk, the section flex downward forming a protective pad on the top to eliminate pole poke-through. Bottom Caps have non-skid discs attached for added stability.
Dr. Shrink is improving on it’s End Caps with this heavy-duty Rhino Cap. Designed for optimum pierce protection it features more surface area, greater strength, and strapping grooves to make your strapping structure easier to create and more durable than ever. It’s designed to keep support poles from poking through shrink wrap on storage covers.
The Professional Film Cutting Knife is used to safely and smoothly cut shrink wrap during installation. No danger of scratching or cutting with it’s hooked end.
The Ring Cutter is a convenient strap cutting tool that allows you to keep a blade available throughout the shrink wrap process and cuts our woven cord strapping with ease.
Don’t forget when you order – do you have enough: tape, vents, strapping, buckles or zipper access doors? These are our most common reorder items and can be easily added to any order.
If at any time you have any questions, please don’t hesitate to give us a call at 800.968.5147 or email us. We’re here to help.

Posted on

September 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Hope everyone is having a great finish to their summer season. Our fall mailers have been mailed out, new product catalogs are here, and the early-buy shrink wrap discount is in full swing. If you did not receive a fall price sheet in the mail and would like one, please call us at 231-723-2685 or 800-968-5147 and we’ll make sure you are added to our list.
Remember that shrink wrap is used for more than just recreation boats, pontoon boats, and other marine related products. It’s widely used to weather protect outdoor patio furniture, outdoor kitchens, lawn and garden equipment, pools, and everything else that gets put away after the summer season. If you have questions on wrapping certain items, we are here to help. In the mean time, please see our Videos & Resources section below to get a better handle on shrink wrapping many of these items.
Hope everyone has a fantastic Labor Day weekend. Contact me anytime with questions or comments and thank you for working with us.”
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

Dr. Shrink Videos & Resources

For  Marine and Recreation applications, we typically recommend a 6 or 7-mil material. The 6-mil is our thinnest shrink wrap and is used for smaller items such as boats, shed frames, pallets, and machinery that will be stored rather than transported. Our 7-mil material is the standard thickness for shrink wrapping boats in snow load areas, light construction jobs, and medium sized machinery. We offer 3 different colors of shrink wrap, all of which are made for different applications.
White shrink wrap works best for the majority of shrink wrapping applications. It reflects the sun and stays tight in all weather conditions making it ideal for transportation. Because of its ability to reflect the sun, the temperature beneath the film stays more consistent, thereby minimizing condensation and moisture build up under the cover.
Blue shrink wrap is generally used in snow-load areas as the darker color helps absorb the heat from the sun.  The warmth of the wrap assists in melting any accumulated snow on the cover much faster than that of the white.  Because of this, your boat will not have to shoulder that additional weight for as long. On the flip-side; because this film easily absorbs heat it makes it a less viable option for warmer climates.  The heat build up under the blue shrink wrap in warmer conditions could potentially cause heat damage to its contents.  In addition, the possibility for ‘loosening’ of the film is higher in hot weather, which does not make it the ideal choice for transportation.
Clear shrink wrap is most commonly used to cover greenhouses, brokerage items, and even live-aboard boats. The advantage of using clear is that you can see through it.  The disadvantage, however, is that the sun penetrates the covers and can accentuate the buildup of moisture/sun damage under the cover. Care must be taken to properly ventilate clear covers in an effort to help prevent damage.
Questions on what size wrap to use, what color, or what mil thickness is right for you? Visit our designated website page here or call us at 800-968-5147.
Don’t forget our handy Boat Size & Venting Chart as well! Please contact us for any installation questions or training assistance!

DIY – Wrap It Up with Dr.+

Get it all wrapped up this year. The Dr. has you covered with a growing library of how-to videos. We cover a wide variety of shrink wrap applications from recreational boat wrapping, full encapsulations, RV campers, patio furniture, and sail boats with the mast up! Access the how-to videos on our training section of our website or our YouTube channel.
Are you more of a hands-on learner? Sign up for ShrinkWrap U, our one-day training course that is designed to give you all the information and training that you need to shrink wrap anything. Our next class is October 25th, 2018. Space is limited, so sign up today to reserve your spot!

Early Buy Discount! – Don’t Forget – Only 2 weeks left!

10% OFF ALL SHRINK WRAP UNTIL SEPTEMBER 15, 2018
You MUST mention this discount when placing your order over the phone or use promo code FALL18 at online checkout. *Valid on standard Retail or Wholesale pricing only*

Water Slides!

Our friends down in Buchanan, Michigan have put our shrink wrap to good use with their “Thrill on the Hill”. This summer they closed Front Street which includes a big hill that just happens to help make a 500′ water slide.

Featured Video:

Check out the video here on How-To Shrink Wrap a Pontoon Boat for the upcoming winter storage season.

September Steals, Deals & Discounts
Quote of the Month –

“Very simple and hassle free! Always a pleasure calling the staff because they are so helpful with questions! Always very fast shipping!” – Travis H. Lakeville, MN Customer

Posted on

August 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – New from Mike

“Happy August! Our fall price sheet mailers are going in the mail this week — we hope you like the new design and new training/how-to diagrams for various projects in different industries. There are also several new products for this season that are perfect for the marine industry and I know will be very popular.  It will be our pleasure being your shrink wrap supplier again this year. Please let us know if you have any questions, comments, or suggestions. I enjoy hearing from all of our customers!”
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

One Stop Shopping! Get it all from Dr. Shrink

Dr. Shrink, Inc. has been in business for over 26 years. The company founder and President, Michael Stenberg, has been applying shrink wrap for over 33 years. This experience and time in the shrink wrap industry has given Dr. Shrink the expertise to offer not only knowledgeable training, installation advice, and support, but also an extensive, custom product line for shrink wrappers.
Dr. Shrink has formulated its own shrink wrap for unbeatable performance in all weather conditions. Our premium shrink wrap is 100% virgin resin with maximum UV inhibitors built in for long term usage.  Dr. Shrink is one-stop shopping for all your shrink wrap products and accessories including heat tools, adhesives, zipper access doors and venting. Get it all in one place to make shopping easier — we have everything you need in stock and ready for immediate shipment!

2018/2019 Fall Mailers!

Dr. Shrink is in the process of mailing out all fall price sheets — make sure you take note of the special giveaway included with your order this year! Also, we are running our “early buy”  discount of 10% off all shrink wrap until September 15, 2018 as long as you use promo code FALL18 online or over the phone.

Early Heat Tool Repair Discount

Whether you need a single part, or a complete rebuild kit, Dr. Shrink has the repair parts you need to keep your heat tool in prime working condition. If you are in need of having your heat tool repaired, Dr. Shrink has a Heat Tool Technician on staff that can diagnose your heat tool’s problem and get it back up and running. Want to troubleshoot your heat tool issue over the phone and try to fix it yourself? Our Heat Tool Technician can answer all of your questions.
Give us a call today and we can offer suggestions, troubleshooting advice, and recommend new parts that can get your gun repaired.  Call us at 800-968-5147 for all your repair needs before the fall shrink wrap season has started!
Need some incentive?  Take 10% off all heat tool repair parts until September 1st, 2018 as long as you mention this promotion or use REPAIR10 at online checkout.

CLOSEOUT Prices on Select Shrink Wrap!

We have extensively went through our warehouse and have added several new sizes of shrink wrap to our Closeout Items list. Our Closeout Items consist of a wide variety of shrink wrap that may have been returned, damaged, dirty or discolored.
Reasons for being on closeout may be:
* damaged by forklift
* damaged in shipping/transit
* dirty
* short in length – had to have some cut off
* discolored
* one/both ends damaged/nicked/scuffed
* good condition, but re-boxed
All sales are final. All rolls are sold as is. First come, first serve. Deeply discounted for fast movement! Call us today at 800-968-5147 or take a look at our Closeout Items list on our website.

Featured Video

Recreational Boat – Learn from the professionals at Dr. Shrink on how to shrink wrap your recreational boat for storage. Already a pro at wrapping boats? This video has some great tips and is an excellent refresher!

Posted on

July 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Hope everyone has a wonderful 4th of July holiday on Wednesday! The team and I will be celebrating the holiday on Tuesday with a staff BBQ lunch on our patio. Wishing you all a great holiday with family and friends.
New and exciting product catalogs for the 2018/2019 season are in process. This year’s catalog is full of informative diagrams and sketches that will help immensely as you tackle any shrink wrap job in any industry. Also featured are our New Products for the year- please see the section below for more details. These will be very popular items for the fall boat wrapping season.
Don’t forget – now is the best time to get your heat tools inspected, diagnosed, and repaired. Our heat tool technician on staff can quickly look at your heat tool to see if any maintenance or repair work needs to be completed. If you’d like your heat tool looked at, please give us a call at 800-968-5147 and we will get you the information you need to send it in to us.
Again, have a wonderful 4th of July holiday and a great July.”
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

2018/2019 Catalogs & Mailers

Dr. Shrink has been working hard on our new product catalog for this year and we are excited to give you a sneak peek. This new product & resource guide is full of new diagrams, charts, and how-to explanations of the basic steps to shrink wrap just about anything. Click here for a couple quick references of what’s to come in the catalog.  Also, you can expect your Fall Special Price Sheet in the mail during August– we will be running our early-buy 10% off all shrink wrap special again this year so don’t miss out!

Happy Independence Day!

Dr. Shrink is proud to be a USA Made company with most of our product line being manufactured within the United States. American Built quality is what sets Dr. Shrink apart from low cost and low quality products. We stand behind every roll of shrink wrap and accessory that we sell with high build quality, after the sale service, and on time delivery.
Remember that our American Built line cannot be matched by any other company in the world! Dr. Shrink supplies all products for shrink wrapping. One stop shopping is how we operate. Make purchasing simple with the supply of all American Built shrink wrapping products.

NEW PRODUCTS

– Available this month!
SeatSaver – an all new revolutionary product that is ideal for any pontoon boat with seat backs that are exposed above the upper rail which come in contact with strapping and shrink wrap material. The SeatSaver fits on all 1.25″ square tubing top rails on pontoon boats and provides either a 2″ or 4″ lift of the strapping over the vinyl seat backs, preventing damage to seat backs from strapping abrasion and indentation. See our SeatSaver Flyer for more details
Rhino Cap –  Dr. Shrink is improving on its proven End Cap with this heavy duty Rhino Cap. Designed for optimum pole poke-through protection, the Rhino Cap features more surface area, greater strength, and strapping grooves to make your strapping structure easier to create and more durable than ever. The edges are strengthened around the entire perimeter to provide maximum strength against snow load. See our Rhino Cap Flyer for more details
Lightning Vent – Dr. Shrink’s new DS-LIGHTNING one-handed installation vent allows for easy and quick installation with an all new strap and friction hood which secures the vent to the cover with no taping required. The large hood over the vent opening offers better weather protection ensuring moisture and weather stays out of your wrapped items. See our Lightning Vent Flyer for more details

Calling All Shrink Wrap Installers!

We know Dr. Shrink customers are some of the best shrink wrap installers in the nation. People frequently call our office asking if we know of any shrink wrap installers in their area that would be willing to wrap a boat, patio furniture, outdoor kitchen, farm equipment, and all other sorts of items.
Are you a shrink wrap installer who would like to be considered to be included on our Professional Shrink Wrap Installers List? If so, all you need to do is fill out this application and either email it back to us at marketing@dr-shrink.com or fax it back to 231-723-9586. Once you’re approved, we will put you on our Installer List and will will refer business to you!

Featured Video

Pontoon Wrapping

July Steals, Deals & Discounts
Quote of the Month:

“Thank you for excelling in taking phone orders, customer service and shipping. The orders have never been wrong.” – Tony P. Port St. Lucie, FL Customer

Posted on

June 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Hope everyone had a great Memorial Day weekend. It was a hot one in Manistee, reaching temperatures of almost 90 degrees Fahrenheit. In case you missed our New Product introductions from last month’s newsletter, we have put them in again. The SeatSaver, Rhino Cap, and Lightning Vent are the perfect additions to our innovative product line.
I would like to remind our Michigan and Wisconsin customers of our Recycling Run for removed shrink wrap covers in need of recycling. Registration Forms are due middle of June (please see the section below for more details).  If you are located in other states, take a look at our REBAG Recycling System for an easy way to recycle your shrink wrap cover(s). Wishing everyone a great start to the summer season.”
– Mike Stenberg – President & CEO, Dr. Shrink, Inc.

Construction & Scaffolding Industry

This month the Dr. is highlighting products and services as it relates to the Construction & Scaffolding Industry. The construction industry can yield huge profit margins and is a 12 month shrink wrap business. Government and large building contacts will often require scaffolding and exterior containment and shrink wrap is the most cost effective and durable material that can be used. Available in Extreme 12-mil and up to 60′ in width, with Flame Retardant sizes also available, the Dr. provides the largest rolls of film available on the market.
A construction site can be a vulnerable place. Whether it’s the construction of a new building or renovation/add-on to an existing one, there’s the risk of weather eroding all the hard work or ceasing it for a long period of time. For example, water damage – whether it’s rain entering the structure, melting snow, or leaks – is the most frequent cause of loss during building projects. Shrink wrapping a building or scaffolding on a construction site means not only protecting the work, but workers and productivity as well.
Dr. Shrink’s premium shrink wrap shrinks “drum-tight” and is far more effective than traditional tarps and sheeting. This durable, weatherproof covering creates a proper enclosure and protects the project from potential damage. Additionally, our shrink wrap creates an improved work environment. Our white shrink wrap allows natural, shadow-free lighting while blocking harmful UV rays. Worker downtime is reduced and the enclosure can even be heated and cooled.
Have questions on how it works or the best application for your project? Email us and let us help!

ShrinkWrap U

ShrinkWrap U is a one-day training session designed to give you all the information you need to shrink wrap anything. Not only will you gain valuable hands-on training, but also the tools for marketing your business in various industries. Our next ShrinkWrap U class is being held on Thursday, July 19th. Space is limited, so sign up today to reserve your spot! All you need to do is complete the ShrinkWrap U Enrollment Form and return it back to Ryan’s attention. If you’re coming from out of state, here’s a list of Travel Accommodations that we recommend. If you have any questions at all, please don’t hesitate to give us a call at 800.968.5147 or email us.

Recycling Run Forms Due!

We hope all your summer toys, furniture, boats, etc. are unwrapped and in use! Need to do something with your shrink wrap cover(s) from these items? Give our Recycling Run a try! If you are in Michigan or Wisconsin, you are eligible for this program. Click here to find out more information.
Our 2018 Recycling Run Registration forms are due on Monday, June 18th. If you don’t get your form in to us by then you might not make it on the pickup list for this year, so get them in! All you have to do is fill out our form and email it back to marketing@dr-shrink.com or fax it back to 231-723-9586, whichever is easier.
Located in a state other than Michigan or Wisconsin? Check out our REBAG Recycling System that works all across the continental United States.  If you have any questions, please let us know.

New Products!

New products from Dr. Shrink, Inc. available this month!
– SeatSaver – an all new revolutionary product that is ideal for any pontoon boat with seat backs that are exposed above the upper rail which come in contact with strapping and shrink wrap material. The SeatSaver fits on all 1.25″ square tubing top rails on pontoon boats and provides either a 2″ or 4″ lift of the strapping over the vinyl seat backs, preventing damage to seat backs from strapping abrasion and indentation. See our SeatSaver Flyer for more details.
– Rhino Cap – Dr. Shrink is improving on its proven End Cap with this heavy duty Rhino Cap. Designed for optimum pole poke-through protection, the Rhino Cap features more surface area, greater strength, and strapping grooves to make your strapping structure easier to create and more durable than ever. The edges are strengthened around the entire perimeter to provide maximum strength against snow load. See our Rhino Cap Flyer for more details.
– Lightning Vent – Dr. Shrink’s new DS-LIGHTNING one-handed installation vent allows for easy and quick installation with an all new strap and friction hood which secures the vent to the cover with no taping required. The large hood over the vent opening offers better weather protection ensuring moisture and weather stays out of your wrapped items. See our Lightning Vent Flyer for more details.

Dr. on the Map – June Travel
Featured Video  – Watch our fun Recycling Video featuring company President/CEO, Mike Stenberg! Click here to watch.
June Steals, Deals & Discounts
Posted on

May 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“I would like to extend a heartfelt thank you to all who took the time to congratulate Dr. Shrink, Inc. on our 26th year in business milestone which we celebrated a couple weeks ago. It has been an honor to be your premium shrink wrap supplier for the past 26 years.
Another year in business brings innovative new products, updated product catalogs, and fresh how-to training videos. I am pleased to introduce revolutionary new products for this season detailed in the section below. These products will be must-have items, especially in the marine industry, and will provide shrink wrap installers with professional, high quality shrink wrap jobs and applications.
We are finally feeling the warmth here in Manistee, MI.  If you are located in Michigan or Wisconsin, please keep in mind that we are running another year of our Recycling Run to make sure all shrink wrap covers are recycled. If you are located in other states within the continental United States, our REBAG Recycling Kit is the perfect option for you.
Happy May Day to all.  Have a wonderful Memorial Day at the end of the month.  Thank you for working with Dr. Shrink, Inc.”
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

Industrial Industry

This month the Dr. is highlighting products and services as it related to the Industrial Industry. This is the fastest growing year-round shrink wrap market; it can yield great business as customers demand packaging solutions along with corrosion inhibiting protection. Top industrial wrapping specialists can also compete with other protection methods to show greater return on investment for their clients.
Manufacturers generate a diverse group of products that come in all different shapes and sizes. For those producing large machinery, they face the challenge of properly storing and transporting the product without inflicting damage. Manufacturers want their products to look pristine and functioning correctly upon delivery. With all the hazards that come with the shipping process, shrink wrap minimizes the possibility of damage more effectively thank other methods such as tarps. Protecting your product is protecting your reputation and business.
Dr. Shrink also has Volatile Corrosion Inhibiting shrink wrap products available that protect ferrous and non-ferrous metals and will not harm glass, plastic or other parts of assemblies. Click here to see our Moisture Inhibiting products.

NEW PRODUCTS

Dr. Shrink has been busy working on some new products for the 2018/2019 year. Here’s a sneak peek of what’s to come in early July.
– SeatSaver – an all new revolutionary product that is ideal for any pontoon boat with seat backs that are exposed above the upper rail which come in contact with strapping and shrink wrap material. The SeatSaver fits on all 1.25″ square tubing top rails on pontoon boats and provides either a 2″ or 4″ lift of the strapping over the vinyl seat backs, preventing damage to seat backs from strapping abrasion and indentation.
See our SeatSaver Flyer for more details
– Rhino Cap – Dr. Shrink is improving on its proven End Cap with this heavy duty Rhino Cap. Designed for optimum pole poke-through protection, the Rhino Cap features more surface area, greater strength, and strapping grooves to make your strapping structure easier to create and more durable than ever. The edges are strengthened around the entire perimeter to provide maximum strength against snow load.
See our Rhino Cap Flyer for more details
– Lightning Vent – Dr. Shrink’s new DS-LIGHTNING one-handed installation vent allows for easy and quick installation with an all new strap and friction hood which secures the vent to the cover with no taping required. The large hood over the vent opening offers better weather protection ensuring moisture and weather stays out of your wrapped items.
See our Lightning Vent Flyer for more details.

Super Mileage Competition

Dr. Shrink’s shrink wrap has been used in a lot of different ways.
Missouri high school students worked with a local technical college for the Missouri Super Mileage Competition.  The team built a small car and competed for maximum mileage in the competition– after the car is built, shrink wrap is used for the skin of the car. In 2017, the team won 1st Place in the competition (clear car shown) with a 219 mpg average. The idea of the clear wrap was to show the construction of the car. This year they competed and took 2nd Place. They built a roadster, with the goal of ‘best in show’. The team used shrink wrap for the body and then painted it black and they did end up winning Best in Show. Congratulations to all who participated and what an interesting use of our product!

Your Frequently Asked Questions – Answered!

Dr. Shrink is proud to offer you world class customer service. Our highly experienced staff are ready to field any question you can throw at them in the many industries of shrink wrap. Below are a few common questions we receive as people are learning about shrink wrap and becoming familiar with the process.
What color shrink wrap should I use? Is there a difference?
Dr. Shrink’s premium shrink wrap comes in blue, white and clear.
Blue absorbs sunlight allowing ice & snow to fall off the cover easier during the winter. Used for winter storage and not recommended to be used as a transportation cover.
White reflects sunlight and harmful UV rays. Best used for transportation covers and general outside storage. White shrink wrap is also the color of choice for work enclosures and scaffolding. It provides shadow-free lighting and good color rendition.
Clear shrink wrap is commonly used for greenhouses and non-storage applications.
Know the color you need, but not the recommended mil thickness? Click here to find out.
Can the heat from the heat tool cause damage?
We must first mention the propane fired heat tools used in shrink wrapping must be used in accordance with the directions in the training DVD. Always remember safety first! The heat from the tool is swept over the cover, almost like spray painting, and is never left on one spot long enough to damage vinyl graphics, paint, gel coat, etc. In fact, the shrink wrap will become thin and holes will form before enough heat is transferred to damage the boat or object. If the shrink wrap should get a burn hole, and it appears the wrap is stuck to the boat, allow the wrap to cool and it will come loose by itself.
How do I repair tear/melt holes in the cover?
It is very easy to repair any holes that are made on a shrink wrap cover. If it a small hole, a piece of our Heat Shrink Tape will fix it quickly. If it is a larger hole, a scrap of shrink wrap approximately 3″ larger than the hole may be tape on the original cover and lightly shrunk.
Are you more of a hands-on learner? Consider our SWU training class.
Learn from the best — learn from the source! Dr. Shrink prides itself on providing world class customer service, professional training and installation advice.
ShrinkWrap University (SWU) is a one-day training course designed to give you all of the information you need to shrink wrap anything. The morning consists of presentations in a classroom setting (product information, safety and techniques, industry applications and profit margins, as well as marketing services). After presentations, we will head back to the warehouse where you will gain an enormous amount of hands-on training and advice. You will leave here very comfortable and with the propane fired heat tool and the shrink wrapping process.
Click here to find out more about SWU.

Recycling Run 2018

Dr. Shrink’s Recycling Run is up and running for 2018. We’ve made some changes to our program and if you have any questions at all, please don’t hesitate to contact us here. The Recycling Run is now available in Michigan and Northern Wisconsin only. If you are in Wisconsin or the Upper Peninsula of Michigan there is a 75 bag minimum requirement for pickup.
Don’t forget that you MUST fax/email your Registration Form back to Dr. Shrink in order to sign up for the pickup in July. For scheduling purposes, please email/fax the Registration Form back by June 18th, 2018.
Dr. Shrink’s premium shrink wrap is 100% virgin resin material that is easily recycled into a variety of usable consumer products. Shrink wrap will NOT biodegrade in a landfill – that’s why it is extremely important to recycle. If this program isn’t available in your area, please call around to local recycling facilities and see if they will take this high quality plastic.

Posted on

April 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Dr. Shrink, Inc. is celebrating 26 years in business this month. April is always the month where I find myself looking back and seeing how much Dr. Shrink has grown over the past 26 years; but also a time where I look toward the future of the company and set new goals for another successful year. I would just like to take a moment to thank each and every one of our customers, distributors, vendors, staff members, friends and family for everything along the way. We wouldn’t be here today without your support.
Things have thawed out for the most part here in Michigan. As you remove your boat covers for the spring and summer season, please remember to properly recycle your shrink wrap. Take a few minutes to watch our silent movie, Don’t Trash Your Shrink Wrap, to get an idea of just how easy it is to recycle your shrink wrap (and to have a few laughs). Hope everyone has a very Happy Easter!”
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

Dr. Shrink – Celebrating 26 Years in Business

On Saturday, April 21st we’ll be celebrating 26 years in the business! During our anniversary week, April 16th through April 22nd, we’re offering $26.00 off an order of $260.00 or more! All you need to do is use promo code 26YEARS online or mention it when placing phone orders.

Recycling Your Shrink Wrap – The Dr. Has You Covered.

With spring in the air and the weather getting warmer, it’s time to think about taking those shrink covers off your boats, campers, RVs and other recreational items. Recycling your shrink wrap covers is something that everyone should do – throwing shrink wrap material into a landfill is waste and damaging to the environment. It will NOT biodegrade in a landfill. Dr. Shrink cares about the environment and wants to help make it easier for you to recycle our film.
Our Recycling Run makes recycling in the Great Lakes area a breeze. This program is only available in MI, WI, IL, IN and OH. Click here for more information or visit www.recycling-run.com.
Our REBAG® Recycling Kit is another option that is available for any state in the Continental U.S.
Take a look below at our Training & Tips section to watch our Don’t Trash Your Shrink Wrap Silent Movie that pairs with our Recycling Run Program. *Please note that pickup locations have changed to only the Great Lake states.

Material Handling Industry

This month the Dr. is highlighting products and services as it relates to the Material Handling Industry. The use of shrink wrap in material handling is becoming more popular, as it is more durable than stretch wrap and full encapsulation can make it completely waterproof. Less strapping will be required and when using a high mil thickness, the object becomes tamper resistant.
Manufacturers produce products all across the globe and in order to successfully transport these products from their origination to final destination, a durable protection solution is required. Offering shrink wrap solutions from 6-12 mil thickness, Dr. Shrink provides some of the most durable transportation protection in the market.
Manufacturers want their products looking brand-new and functioning correctly upon delivery. With all the issues that come with the shipping process, shrink wrap minimizes the possibility of damage more effectively than other methods such as tarps. Protecting your goods through shrink wrap is an investment. With the multiple ways something is capable of receiving damage during the storage and shipment process, protecting it is a matter of loss prevention. Protecting your product is protecting your reputation and business.
If you have any questions about applications, please feel free to give us a call at 800.968.5147 or email us. We’re always here to help.

Reminder! Dr. Shrink Stocks European Flame Retardant Shrink Wrap

Throughout the world, the Construction & Scaffolding industry has seen tremendous growth in shrink wrap applications and uses. Internationally, there are different requirements construction materials need to meet when used on projects in this industry.
Keep in mind when doing your shrink wrap research that Dr. Shrink’s European Flame Retardant shrink wrap has passed the Fire Test according to EN 13823 SBI and meets the criteria for: ISO 11925-2:2010, BS EN 13823:2010, and Fire Classification Bs-1, d0. It’s available in 2 sizes:
– 24′ x 60′ 12 mil (300 micron) white (DS-241260WFRES)
– 40′ x 60′ 12 mil (300 micron) white (DS-401260WFRES)
Click here for more information.
Interested in our standard Flame Retardant Shrink Wrap? See available sizes

Shrink Wrap vs. Toilet Paper? – The Battle of Two Necessary Household Items

Shrink Wrap vs. Toilet Paper_graphic
HAPPY APRIL FOOLS’ DAY!

Dr. on the Map – April Travel
Training & Tips – Removing Your Shrink Wrap Cover for Recycling
April Steals, Deals & Discounts
Posted on

March 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Spring is in the air lately in Manistee, Michigan! The snow has started to melt and the temperatures are reaching into the high 40s. I have a couple of busy upcoming months for international travel, starting in Australia, onto Shanghai, then Germany, and finally Spain. Just because I’m across the globe doesn’t mean I’m inaccessible– email me anytime.
I’d like to personally thank each and every person who submitted photos for our Shrinkfast giveaway to help with our photo collection. I was able to look through each participant’s submission photos and the quality of work was outstanding! Even though the giveaway is over, please keep the photos coming as I enjoy seeing what our customers are up to and the new and unique applications shrink wrap is used for. Feel free to email them to us any time.
The trucking and transportation industry has been fresh on my mind lately. Please be sure to read through the section below for information on this industry. Now is the time to tap into new and developing markets such as trucking and transportation– we are here to help you as you expand into more industries.
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

Shrinkfast Giveaway Winner!

We would like to congratulate Kip W. in Montana on being the winner of our Shrinkfast® Giveaway! He won a Shrinkfast® 998 Heat Tool Kit and a 4′ Extension! Thank you to everyone who participated in our photo contest and helped grow our photo library. A big thank you to Shrinkfast® for partnering with us for this promotion.

Transportation Across Countries

Pronto Clearing3This shrink wrapped catamaran boat was transported from Cape Town, South Africa to Mombasa, Kenya. It was a 5500 km (roughly 3,417 miles) road journey that took 11 days. When it arrived in Kenya, it still looked brand new! The installers used an 8 mil white wrap which is perfect because the white reflects sunlight and harmful UV rays. It’s best used for transportation covers and general outside storage. Have questions about what color would work best for your application? Click here to see the differences in the 3 main colors – blue, white and clear.
An 8 mil thickness is excellent for covering large boats, shrink wrapping large building frames, and for wrapping large equipment with sharp protrusions for transportation or storage. But if you want thicker– we have it! Click here to see what shrink wrap mil thickness is right for your job.
Pronto Clearing
Do you have a project that you’re not sure what size to use, mil thickness or color? Email us some pictures with dimensions and details – we’ll give you our professional recommendation.

Think Spring & Think Recycling!

With the first day of Spring just around the corner – on March 20th to be exact; it’s time to enjoy the warmer weather and removing those shrink wrap covers. Dr. Shrink wants to help you with recycling your shrink wrap covers; we have two different programs in place to make it an easy process for you.
We are once again partnering with Bay Area Recycling (BARC) this year for our Recycling Run Program. If you are in Michigan, Wisconsin, Indiana, Illinois or Ohio — our Recycling Run is available to you. The program is simple and easy:
– Buy Dr. Shrink’s EZ-Fill Bags for only $5.00 each from Dr. Shrink
– Stuff the EZ-Fill Bag with ONLY shrink wrap
– Return the Registration Form to Dr. Shrink to have your pick-up scheduled with BARC.
Our REBAG® Recycling Kit is a different recycling option that we offer.  The REBAG® Kit works across the Continental US. The kit consists of a 30″ x 50″ clear bag with cover removal directions printed on it, a closure device for the bag and a prepaid FedEx shipping label. Each REBAG® will hold the cover from a 26′ power boat or approximately 600 square feet. *Note: All strapping, buckles, vents, zipper doors, etc. must be removed prior to packing the cover in the bag.
Dr. Shrink’s premium shrink wrap is a 100% virgin resin material that is easily recycled into a variety of usable consumer products. Shrink wrap will NOT biograde in a landfill – that’s why it is extremely important to recycle. If neither of these programs work for you, we please ask that you call around to local recycling facilities in your area and see if they will accept this premium #4 LDPE plastic.

Sling-Shield from Dr. Shrink

Sling-Shield is used to protect boat lift slings and vessel hulls during launch and haul-out. It rinses off completely so as to not transfer dirt, grime, etc. from one boat to another and keeps slings clean which extends sling life. Sling-Shield is a simple, one man installation system. It is simply pulled over the sling, cut from the roll and then taped in place.
When boats with bottom paint are lifted by a boat lift, the slings tend to peel the paint from the hull – the Sling-Shield helps stop damage to the bottom paint. It’s also used as a tube to direct air into a boat during service or assembly when attached to a fan or air conditioner. It can also exhaust dust and fumes from inside holds, engine compartments and cabins during service, for personal safety during repairs and assembly. The Sling-Shield will shrink with very little heat; it can be used to protect sail boat masts during transportation and storage.
Now in 6 different widths & available in 300′ or 600′ lengths
6″ x 300′ or 600′ rolls called “Shore Power Sleeves” are great when being used to protect shore power cords, lines and hoses from damage. Keeps dock areas neat and clean during dockage.
– 8″ x 600′ roll is used during dockage to protect dock power cords from damage during tide changes and vessel movement, and to keep dock areas clear and neat. it can be used in boat manufacturing during assembly and marine service to run power cords, air lines, etc. over the side of the boat to prevent damage and marks.
– 12″ x 600′ clear roll (special order) is used as ducting and ventilation tubing.
– 16″ x 300′ or 600′ white rolls are standard for 12″ slings.
– 18″ x 300′ or 600′ white rolls are made for slings with rub-rail pads.
– 36″ x 600′ 8 mil white Yacht Sling-Shield is used on Mega Yacht Mobile 300 ton boat lift slings and larger.
– 1 1/2″ x 108′ Poly Vinyl Tape is used to hold the Sling-Shield to the sling to prevent it from slipping down the sling during usage. This tape will hold even when wet. Other tapes like duct tape or masking tape will not stay in place once submerged in water.
All Sling-Shield products are made in the USA & come with UVI protection.

Dr. on the Map – March Travel
Trucking & Transportation Industry

This month the Dr. is highlighting products and services as it relates to the Trucking and Transportation Industry. Manufacturers generate a range of diverse products that come in all types of different shapes and sizes. For those producing large machinery, they face the challenge of properly storing and transporting the product without inflicting damage. Dr. Shrink has the largest selection of shrink wrap from 12′ to 60′ wide in various lengths and mil thicknesses. Complete weather protection during transportation and ventilation options to help eliminate mold and mildew from forming if the delivered item will need to be stored upon arrival. Sun degradation warranty for 18 months in any climate!
Manufacturers want their products looking pristine and functioning correctly upon delivery. With all the hazards that come with the shipping process, shrink wrap minimizes the possibility of damage more effectively than other methods such as tarps. Protecting your good through shrink wrap is an investment. Protecting your product is protecting your reputation and business.
If you have any questions about applications, please feel free to give us a call at 800.968.5147 or email us. We’re always here to help.

Training & Tips – Full Encapsulation

This month we highlight the process of shrink wrapping a piece of equipment for full encapsulation. Click here to see the video.

March Steals, Deals & Discounts
Latest Closeout Specials – Once They’re Gone, They’re Gone
Quote of the Month

– “Making online order very easy and shipping out orders in a timely manner.” – Rickie H. Des Moines, IA Customer

Posted on

February 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Happy February! Anyone interested in winning a free Shrinkfast® 998 & 4′ Extension this month? We are giving away both to one lucky winner– but there’s a catch, we need your help with expanding our photo library! I have seen some truly amazing photos of our customer’s shrink wrap work and I’m hoping you would give Dr. Shrink permission to use your photos in our sales materials such as our yearly product catalog, brochures/flyers, product presentations, and other marketing efforts. See the section below for instructions on how to submit your shrink wrap photos for entry into our Shrinkfast giveaway. Our marketing team and I would greatly appreciate your help in expanding our photo library. Thank you to Shrinkfast® for partnering with us for this giveaway. Please read through the section below for more information.
Don’t forget to put your heat tool to work 365 days a year – shrink wrap is rapidly becoming the new avenue for protection in a number of different industries. It is no surprise that scaffolding and containment is quickly rising on the list of industries that reaps the benefits of shrink wrap protection– especially during these months. Dr. Shrink is committed to offering the best protection to these industries through supplying the best shrink wrap products on the market today.
If you have any questions on your application, process or sizing, please feel free to give us a call at 800-968-5147 or email us. Thank you for working with all of us at Dr. Shrink.
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

Shrinkfast® Giveaway!

We’re looking for your help! We need shrink wrap photos to help expand our photo library. Do you have any pictures of your shrink wrap work that you would be willing to share with us? A picture goes a long way in the shrink wrap world, and we are in need of fresh, new photos showing a wide range of shrink wrap applications.
To create some incentive, any participant who submits their photo(s) will automatically be entered into the Shrinkfast Giveaway drawing!
Starting today until Monday, February 18th – submit a photo(s) of your best shrink wrap job(s) in any industry and you will be entered into a drawing to win a Shrinkfast® 998 Heat Tool and a Shrinkfast® 4′ Extension! Anyone who submits a photo will receive a Dr. Shrink Multi-Tool as a thank you from us, for helping expand our photo library.
The more photos you submit– the better your chances to win!
Please e-mail your photo(s) to marketing@dr-shrink.com with the subject line PHOTO SUBMISSION, and please include your name and/or company name and phone number in the body of the e-mail so we can contact you if you are the winner.  The winner will be randomly selected and contacted on Monday, February 18th. We would like to thank Shrinkfast® for partnering with us for this giveaway!
*Submitting your photo(s) to Dr. Shrink for this promotion will give Dr. Shrink permission to use submitted photo(s) in their marketing materials.

Show Your Love with Pink from Dr. Shrink

Make a statement this Valentine’s Day (or any day!) by using our pink shrink wrap! 14′ x 128′ 8-mil PINK or 17′ x 110′ 8-mil PINK

Dr. Shrink Covers the Globe with International Distributors

Dr. Shrink is proud to supply our premium shrink wrap and installation accessories around the globe. Alfa Solution in Grimstad, Norway stocks a large selection of Dr. Shrink, Inc. materials for immediate shipment. if you need fill-in items fast while your containers are on the water then Alfa Solution will be able to help. Take a look at our Dr. Shrink Distributor List and contact us to connect with a distributor near you.

Shrink Wrap U Class

Dr. Shrink’s next Shrink Wrap U Class is coming up next month on Thursday, March 1st. SWU is a one day training session designed to give you all of the information that you’ll need to shrink wrap anything. Not only will you get hands-on training, but also all the tools for marketing your business in various industries and proper safety practices. Interested in attending? Space is limited, so sign up today and reserve your spot. Click here to find out more information.

Work Year Round: Shrink Wrap for the Construction/Scaffold Industry

This month the Dr. is highlighting products and services as it relates to the Construction Industry. A construction site can be a vulnerable place – whether it’s the construction of a new building or renovation/add-on to an existing one, there’s the risk of weather eroding all the hard work or ceasing it for a long period of time. For example, water damage – whether it’s rain entering the structure, melting snow, or leaks – is the second most frequent case of loss during building projects.
Dr. Shrink stocks a complete line of products that are capable of wrapping large buildings and scaffolding. Our shrink wrap system is far more effective than traditional tarps and sheeting. Shrink wrap creates a proper enclosure and protects your project from potential damage. Dr. Shrink shrink wrap creates an improved work environment because it allows natural, shadow-free lighting while blocking harmful UV rays. Worker downtime is reduced and the enclosure can even be heated and cooled.
For buildings, an attachment system is placed around the entire base of the building. When the shrink wrap is draped over, it requires immediate attachment. Attach the shrink wrap along the base, pulling any looseness out of the material. Once secured, the entire wrap is heated and shrunk starting from the base and moving upward. If you have any questions about applications, please feel free to give us a call at 800.968.5147 or email us. We’re always here to help.

Training & Tips

– Modular Homes video – click here.

February Steals & Deals
Closeout Deals
Posted on

January 2018 Shrink Wrap News – from the Industry Leader, Dr. Shrink, Inc.

*To see the entire Newsletter, click here.

Dr. Notes – News from Mike

“Happy New Year! Hope everyone had a wonderful Christmas season with your family and friends. Our team had some fun wearing our ugly Christmas sweaters for our annual staff holiday photo and the little Dr. Shrinkers enjoyed a special visit from Santa Claus and Mrs. Claus last week at a local pizza place in Manistee. 2017 has been an exciting year for Dr. Shrink, Inc. and we look forward to 2018. I want to thank each of you for your continued patronage and loyalty to Dr. Shrink, Inc.
-Mike Stenberg
President & CEO, Dr. Shrink, Inc.

Annual Ugly Sweater Photo

Merry Christmas

A special visit from Santa Claus!

Dr. Shrink had a visit from Santa and Mrs. Claus on Dec. 21st at Famous Flynn’s in downtown Manistee. It was a great turnout, with all the kids getting to see Santa and visit with each other. We hope you all had a very Merry Christmas!
Santa Collage

Congratulations to our 4′ Extension Giveaway Winner!

Congratulations to Dawn from Riveria Beach, FL on winning a brand new 4′ extension for the Shrinkfast 998 Heat Tool! Thank you to everyone who placed orders and/or filled our our Christmas Giveaway Form! Did you miss out on the chance to win? Make sure you are a subscriber to our e-lists here!

Dr. on the Map – January Travel

– ReFit Show – Ft. Lauderdale, FL (Mike) Jan. 10th – 11th
– World of Concrete – Las Vegas, NV (Mike) Jan. 23rd – 26th
– IMBC – New Orleans, LA (Mike) Jan. 31st – Feb. 2nd

Transportation/Material Handling Industry

This month the Dr. is highlighting products and services as it relates to the Transportation and Material Handling Industry.
Manufacturers produce products all across the globe and in order to successfully transport these products from their origination to the final destination, a durable form of protection is required.
Dr. Shrink offers premium shrink wrap solutions from 6-12mil thickness and 12′-60′ widths to provide some of the most durable transportation protection on the market. Entire flatbed loads of machinery can be completely weather protected during transportation.
Not sure what size shrink wrap you need for your particular application? Have general application questions regarding the transportation industry? Call us at 800-968-5147 to speak with one of our knowledgeable staff members! We will get you all the information you need, quickly.

Training & Tips

– How to Shrink Wrap a Trailer

January Steals, Deals & Discounts