Shrink Wrap Kit for Runabouts and Pontoon Boats up to 24′ (DS-SWK)

$163.83

*This shrink wrap kit is designed for standard runabouts without wakeboard towers up to 24′ and pontoons up to 24′ with up to an 8’ beam.  Also great for yard and garden equipment, and patio and deck furniture.

The following is included in this kit:
(1) Roll of 17’ x 31’ white, 7-mil shrink wrap
(1) Roll of 2” x 180’ white Heat Shrink Tape
(1) Roll of 3/4” x 300’ Woven Cord Strapping
(3) End Caps for support posts
(6) Individual 3/4” buckles
(1) Ring Cutter to cut strapping
(1) Disposable Film Knife to cut shrink wrap (color may vary)
(4) Weather-Tight Self-Adhesive Vents

What you will need to supply:
•  Propane Fired Heat Tool (Shrinkfast MZ is recommended for this consumer shrink wrap kit, other heat tool options are available here)
•  Ladder
•  Hand Saw
•  2×4 Support Poles
•  Propane Tank

In stock

SKU: DS-SWK Categories: , , ,

Product Description

Need help with installation? We’ve got you covered!  Call 800-968-5147 or visit our training section.

*This shrink wrap kit is designed for standard runabouts without wakeboard towers up to 24′ and pontoons up to 24′ with up to an 8’ beam.  Also great for yard and garden equipment, and patio and deck furniture.

The following is included in this kit:
(1) Roll of 17’ x 31’ white, 7-mil shrink wrap
(1) Roll of 2” x 180’ white Heat Shrink Tape
(1) Roll of 3/4” x 300’ Woven Cord Strapping
(3) End Caps for support posts
(6) Individual 3/4” buckles
(1) Ring Cutter to cut strapping
(1) Disposable Film Knife to cut shrink wrap (color may vary)
(4) Weather-Tight Self-Adhesive Vents

What you will need to supply:
•  Propane Fired Heat Tool (Shrinkfast MZ is recommended for this consumer kit; other options available here)
•  Ladder
•  Hand Saw
•  2×4 Support Poles
•  Propane Tank

Additional Information

Weight 27.5 lbs
Dimensions 33.25 × 16.75 × 7.75 in
Color

Industry

Length

Mil Thickness

Product Type

Width

WARNING:
Shrink wrap can burn.
If heat is applied incorrectly, shrink wrap can ignite into open flame. It can also drop down onto other combustible material and cause secondary ignition and fire. If at any time you observe the wrap on fire immediately stop what you are doing and carefully inspect the area where you are working for a possible fire. Keep a fire extinguisher available at all times.

Standard Shrink Wrap Specs

Color Specific SDS Information:
White Shrink Wrap SDS
Blue Shrink Wrap SDS
Clear Shrink Wrap SDS

How-To Shrink Wrap a Rec Boat (detailed instructions)

How-To Shrink Wrap a Rec Boat (quick one-page reference sheet)

How-To Shrink Wrap a Pontoon Boat

How-To Shrink Wrap a Sailboat- Mast Up

How-To Shrink Wrap a Sailboat- Mast Down

How-To Fully Encapsulate (industrial)

How-To Shrink Wrap Modular Units

How-To Shrink Wrap for Scaffolding (general)

How-To Use the Strapping and Buckles

Vent Installation and Boat Size/Venting Chart

 

Related products